HORIZONTAL SEPARATOR SKID

HORIZONTAL SEPARATOR SKID Packaged in 2009 (90% completed) Sour Service Size: 48″ ID x 10′-0″ S/S Design Pressure: 1800 PSIG @ 250° F M.D.M.T: -49° F Three Phase dressed two phase Corrosion Allowance: .125″ Head Material: SA-516-70N Shell Material: SA-516-70N Stress Relieved: Yes Full X-Ray: Yes “U” Stamp: Yes Internally Coated: Devoe 253 External Insulation: […]

HEAT EXCHANGER – NEN

EXCHANGER – NEN Manufacturer: Exchanger Industries in 1994 HEAT EXCHANGER – NEN Tube Surface Area: 438.2 Ft.² Size 15-240 Tube Surface Area: Shell: 465 PSIG @ 150° F Tube: 465 PSIG @ 150° F Tubes: 116 x 0.75″ OD x 16 BWG Shell Material: SA-312-340L Stainless Steel Head Material: SA-312-340L Stainless Steel Tube Material: SA-249-304L Radiography: 100% (RT-1) […]

EXCHANGERS – NEN

EXCHANGER – NEN Built in 2015 and never put into service M.A.W.P Shell: 282 PSI @ 417° F M.A.W.P Tube: 217 PSI @ 417° F Material Shell: TBA Material Tube: TBA M.D.M.T. Shell: -20° F M.D.M.T. Tube: -20° F P.W.H.T Shell: No P.W.H.T Tube: No Radiography (S/H) Shell: Full Radiography (S/H) Tube: Full Effective Surface […]

333,295 BTU/H PROPANE CONDENSER

PROPANE CONDENSER / PRODUCT COOLER Built in 2009 and never used Aerial Cooler: Ace Model E-54-7 c/w 15 HP Motor Propane Condenser: 300 PSI @ 200° / -20° F (333,295 Btu/h) Product Cooler: 400 PSI @ 300° / -20° F (44,000 Btu/h) Accumulator Vessel: 20″ OD x 8′-0″ S/S, 300 PSIG Dryer: Sporlan C-1448 300 […]

78 BBL. FKOD

78 BBL. FKOD Manufactured by Faoli in 1989 66″ ID x 16′-0″ S/S 150 PSIG @ 149° F Head Material: SA240TP304L Stainless Steel Shell Material: SA240TP304L Stainless Steel RT-2 “U” Stamp: Yes Internally Coated: No N1 – Vapour Inlet: 12″ 150# RF N2 – Vapour Outlet: 10″ 150# RF N3 – Vapour Outlet: 10″ 150# RF N4 […]

PROPANE CONDENSER

PROPANE CONDENSER / PRODUCT COOLER 333,295 BTU/H Built in 2009 and never used Aerial Cooler: Ace Model E-54-7 c/w 15 HP Motor Propane Condenser: 300 PSI @ 200° / -20° F (333,295 Btu/h) Product Cooler: 400 PSI @ 300° / -20° F (44,000 Btu/h) Accumulator Vessel: 20″ OD x 8′-0″ S/S, 300 PSIG Dryer: Sporlan […]

VERTICAL PARTICLE FILTER

VERTICAL PARTICLE FILTER Built in 2009 as Rich Amine Particle Filters Sour Service PS Filter Model: PB-36-1230-8F-256-1 36″ ID x 42″ S/S 256 PSI @ 212° F Inlet & OutLet: 6″ 150# RF Manway: 36″ 150# Quick Closure CA: 0.125″ MDMT: -50° F Replacement Element: PBC-5AB-24P Design Capacity: 31,753 Gallons/h Insulated: No CRN#: U-8218.2 “U” […]

60″ ID HORIZONTAL VESSEL (ONLY)

HORIZONTAL SEPARATOR VESSEL (ONLY) Built in 2014 for Diluent Recovery Service Size: 60″ ID x 20′-0″ S/S Design Pressure: 172 PSIG @ 302° F Corrosion Allowance: 0.250″ Head Material: SA-516-70N Shell Material: SA-516-70N Stress Relieved: Yes Full X-Ray: Yes RT-1 Inlet: 6″ Manways: 3 x 24″ Insulated: Yes “U” Stamp: Yes Never used and stored […]

6″ 900# BW (24)

GATE VALVES – (24) Built by TY By Pass Assembly Size: 6″ Class: 900# Trim: 5 Body: A216 WCB Ends: Flanged BW (Sch.120) MTR’s Never used & stored in Alberta

6″ 900# BW (24)

GATE VALVES – (24) Built by TY By Pass Assembly Size: 6″ Class: 900# Trim: 5 Body: A216 WCB Ends: Flanged BW (Sch.120) MTR’s Never used & stored in Alberta

8″ 300# RF (3)

GATE VALVES – (3) Built by TY Sour Service Size: 8″ Class: 300# Trim: 12 Body: A351 GR CF8M Stainless Steel Ends: Flanged RF MTR’s Never used & stored in Alberta

10″ 900# BW (2)

GATE VALVES – (2) Built by TY By Pass Assembly Size: 10″ Class: 900# Trim: 5 Body: A216 WCB Ends: Flanged BW (Sch.120) MTR’s Never used & stored in Alberta

2″ 600# RF (7)

BALL VALVES – (7) Built by KIFC or KTM Sour Service Size: 2″ Class: 600# Stainless Steel Ball Body: A-351-CF8M Stailnless Steel Ends: Flanged RF MTR’s Never used & stored in Alberta

2″ 600# RF (7)

BALL VALVES – (7) Built by KIFC or KTM Sour Service Size: 2″ Class: 600# Stainless Steel Ball Body: A-351-CF8M Stailnless Steel Ends: Flanged RF MTR’s Never used & stored in Alberta

3″ 900# FP RTJ – TRUNION (4)

BALL VALVES – TRUNION (4) Built by Neway Fig #: TB3-F30JO9LH-S3-01-C2 Size: 3″ FP Class: 900# Body: A350 LF2 Ball: A350 LF2 / ENP Stem: A350 LF2 / ENP Seats: PEEK Ends: Flanged RTJ 410 M Impreglon Coated Sour  / Low Temperature Service Never used & stored in Alberta

3″ 900# FP RTJ – TRUNION (4)

BALL VALVES – TRUNION (4) Built by Cameron Grove Size: 3″ FP Class: 900# Body: A350 LF2 Ball: CF8M Stainless Steel Stem: A350 LF2 / ENP Seats: PEEK Ends: Flanged RTJ 410 M Impreglon Coated Sour  / Low Temperature Service Never used & stored in Alberta

4″ 900# FP RTJ – TRUNION (4)

BALL VALVES – TRUNION (4) Built by Cameron Grove Type: B4C Size: 4″ FP Class: 900# Body: A350 LF2 Ball: Carbon Steel ENC Stem: Carbon Steel ENC Seats: PEEK Ends: Flanged RTJ 410 M Impreglon Coated Sour  / Low Temperature Service Never used & stored in Alberta

6″ 600#FP RF – TRUNION (2)

BALL VALVES – TRUNION (2) Built by Neway Fig #: TB3-F60ORO6LG-S1-01-C2 Size: 6″ FP Class: 600# Body: A350 LF2 Ball: A350 LF2 / ENP Stem: A350 LF2 / ENP Seats: PTFE Ends: Flanged RF 410 M Impreglon Coated Sour  / Low Temperature Service Never used & stored in Alberta

12″ 150# GVS BALL VALVE & BETTIS ACTUATOR

12″ 150# GVS BALL VALVE & BETTIS ACTUATOR Model: GB1 Size: 12″ Class: 150# Trim: NACE Temp: -50° F @ 285 PSIG / +400° F @ 200 PSIG Ends: Flanged RF Body: A-350 LF2 Ball: A-350 LF2 + ENP3 Stem: AISI 4140 + ENP3 Seal: Viton GLT AED + Peek ​Fire Safe: Certified API 6FA & API […]

10″ 900# GVS BALL VALVE & BETTIS ACTUATOR

10″ 900# GVS BALL VALVE & BETTIS ACTUATOR Model: GB1 Size: 10″ Class: 900# Trim: NACE Temp: -50° F @ 2220 PSIG / +400° F @ 1900 PSIG Ends: Flanged RF Body: A-350 LF2 Ball: A-350 LF2 + ENP3 Stem: AISI 4140 + ENP3 Seal: Viton GLT AED + Peek ​Fire Safe: Certified API 6FA & API […]

8″ 150# GVS BALL VALVES & BETTIS ACTUATORS (4)

8″ 150# GVS BALL VALVES & BETTIS ACTUATORS (4) Model: GB1 Size: 8″ Class: 150# Trim: NACE Temp: -50° F @ 285 PSIG / +400° F @ 200 PSIG Ends: Flanged RF Body: A-350 LF2 Ball: A-350 LF2 + ENP3 Stem: AISI 4140 + ENP3 Seal: Viton GLT AED + Peek ​Fire Safe: Certified API 6FA & […]

6″ 150# GVS BALL VALVE & BETTIS ACTUATOR

6″ 150# GVS BALL VALVE & BETTIS ACTUATOR Model: GB1 Size: 6″ Class: 150# Trim: NACE Temp: -50° F @ 285 PSIG / +400° F @ 200 PSIG Ends: Flanged RF Body: A-350 LF2 Ball: A-350 LF2 + ENP3 Stem: AISI 4140 + ENP3 Seal: Viton GLT AED + Peek ​Fire Safe: Certified API 6FA & API […]

4″ 600# GVS BALL VALVE & BETTIS ACTUATOR

4″ 600# GVS BALL VALVE & BETTIS ACTUATOR Model: GB1 Size: 4″ Class: 600# Trim: NACE Temp: -50° F @ 1480 PSIG / +400° F @ 1265 PSIG Ends: Flanged RF Body: A-350 LF2 Ball: F 316 Stainless Steel Stem: F 316 Stainless Steel Seal: Viton GLT AED + Peek ​Fire Safe: Certified API 6FA & […]

160″ ID AIR RECEIVER – VERTICAL

160″ ID AIR RECEIVER – VERTICAL Built in 2014 160″ ID x 40′-0″ S/S 152 PSIG Shell Material: A-516-70 Head Material: A-516-70 RT-1 C.A.: 0.0625” Weight Empty: 68,000 Lbs. Inlet: 6″ 150# RF Outlet: 6″ 150# RF Manway: 24″ 150# RF Registration: Alberta Never used & stored in Alberta

142.5 ACFM INSTRUMENT AIR PACKAGES (2)

142.5 ACFM  AIR COMPRESORS (2) CompAir Model D37H-RS Air Cooler Water Flooded Rotary Screw 142.5 ACFM @125 PSIG 50 HP Electric Motor (460V/3/60) Air Receiver Digital Panel TEFC Enclosure Export Crating VERTICAL AIR RECEIVER Built in the USA Capacity: 2200 Gallons Each 60″ OD x 198″ OAL 200 PSIG Inlet & Outlet: 6″ 150# RFWN […]

FLARE TIP – SONIC VELOCITY

FLARE TIP – SONIC VELOCITY  Built by Aereon and never put int service Model SN-24-MACH-1 Ultra-Low Radiation Design Spring Actuated Variable Slot Profile High Pressure Sonic Velocity Arms Array ​Flame Stability Spider 24″ OD x 10′-0″ Long 24″ 150# RFWN Flange Connection Tip Material: 316 Stainless Steel Electronic Pilots (Retractable) Electronic Ignition Control System Flow Range:0-180MMSCFD Never […]

FLARE TIPS – SONIC VELOCITY (3)

FLARE TIPS – SONIC VELOCITY (3) Built by Aereon and never put int service Model VM-SA-30 (VariMach) Ultra-Low Radiation Spring Actuated Variable Slot Profile High Pressure Sonic Velocity Arms Array ​Flame Stability Spider 30″ OD x 10′-0″ Long 30″ 150# RFWN Flange Connection Tip Material: 316 Stainless Steel 3 Electronic Pilots (One Retractable) Electronic Ignition Control System […]

FLARE TIPS – SONIC VELOCITY (2)

FLARE TIPS – SONIC VELOCITY (2) Built by Aereon and never put int service Model VM-SA-42 (VariMach) Ultra-Low Radiation Spring Actuated Variable Slot Profile High Pressure Sonic Velocity Arms Array ​Flame Stability Spider 42″ OD x 10′-0″ Long 42″ 150# RFWN Flange Connection Tip Material: 316 Stainless Steel 3 Electronic Pilots (One Retractable) Electronic Ignition Control System […]

FLARE TIP – AIR ASSISTED

FLARE TIP – AIR ASSISTED Built by Aereon Model SFVP-1642 42″ Outer Tip 16″ Inner Tip Dynamic Purge Seal 42″ Flange Connection Tip Material: 316 Stainless Steel 3 Geminex Electronic Pilots (Retractable) Nema XXXX Electronic Ignition Control System Sentinel Ultraviolet Flame Monitor Flow Range:0-26MMSCFD Combustion Blower Never used & stored in the USA

3500 HP VERTICAL CENTRIFUGAL PUMPS (2)

3500 HP VERTICAL CENTRIFUGAL PUMPS (2) Sulzer VS6 Model SJD 24DLC-18QLC (up to 7 stages) Rated flow / Differential head: 4200 GPM / 250-1500 Ft. 3500 HP GE TEAAC electric motor (6300V/3/60) Commissioning spares Two years spare parts Never used & stored in the USA

8 MMSCFD REFRIGERATION SKID (LOOSE COMPONENTS)

8 MMSCFD REFRIGERATION SKID (LOOSE COMPONENTS Originally packaged by Thermo Design in 1986 MAWP: 1000 PSI @ -45°F C-460 – Refrigeration Compressor, Mycom Model P12.4B2 c/w 200 HP Motor T-530 – Deethanizer Tower, 20″ OD x 54’5″ S/S 400 PSI E-400- Gas / Gas Exchanger, 8″ OD x 40′-0″ S/S E-410 A/B –  Gas / Gas […]

1039 HP REFRIGERATION COMPRESSOR SKID

1039 HP REFRIGERATION COMPRESSOR SKID Built in 2004 Skid is missing Chiller & Gas/Gas HEX’s Refrigeration Compressor: Frick Model TDSH 283S Capacity: 2711.8 m³/h Motor: 1039 HP (775 kW) @ 3565 RPM, 3/60/4160 VAC Propane Trim Condenser: Yes Propane Oil Cooler: Yes Propane Condenser: Yes Propane Pre-Lube Oil Pump: Yes Cooling Water Pump: Yes Propane […]

SAMPLING MANIFOLDS (2)

SAMPLING MANIFOLDS (2) Built by Parker Double Block & Bleed Part #: SPBY100B32F9008AFN-200 2″ 2500# RF Flange 8″ Long Sampler 316 Stainless Steel ½” Alok Outlet Connection Never used & stored in Alberta

SAMPLING MANIFOLDS (2)

SAMPLING MANIFOLDS (2) Built by Parker Double Block & Bleed Part #: SPBY100B32F9008AFN-340 2″ 900# RF Flange 13½” Long Sampler 316 Stainless Steel ½” Alok Outlet Connection Never used & stored in Alberta

60″ ID VERTICAL SCRUBBER VESSEL

60″ ID VERTICAL SCRUBBER VESSEL Built in 2009 and never put into service Sour Service 60″ D x 96″ S/S 256 PSIG @ 205° F CA: 0.125″ RT-1 “U” Stamp Inlet: 12″ 150# Outlet: 12″ 150# Liquid Outlet: 2″ 150# Steam Outlet: 2″ 150# Vent: 6″ 150# Manway: 24″ 150# Mesh Pad: 6″ Thick Never […]

90″ ID VERTICAL SEPARATOR VESSEL

90″ ID VERTICAL SEPARATOR VESSEL Built in 2009 Sour Service 90″ ID x 10′-6″ S/S 26′-5″ OAL 1870 PSI @ 250° F 3-Phase Heads: SA-516-70N Shell: SA-516-70N RT-1 Heat Treated: Full CA: 0.187″ “U” Stamp: Yes MDMT: -20° F @ 1870 PSI Inlet: 12″ 900# RFWN Outlet: 16″ 900# RFWN Outlet: 4″ 900# RFWN Manway: 24″ […]

157 BBL FIBERGLASS TANK

157 BBL FIBERGLASS TANK Manufacture by ZCL Composites Inc. Originally designed for underground sewage storage All flanges complete with blind covers, studs, nuts and gaskets for shipping Tie down straps with turnbuckles and concrete anchors Shipping saddles Two sets of spare gaskets for all nozzles Extra studs and nuts for flanges Never used & stored […]

CRYOGENIC STORAGE TANKS (6)

CRYOGENIC STORAGE TANKS (6) Built in 2012 and never used 100,000 USWG Double Wall 304 Stainless Steel Inner 50 PSIG @ -320 / 150° F Inner SA516-70N Outer 30 PSIG @ -40 / 300° F Outer Vacuum Insulated 142′-8″ OAL Canadian Registration Never used & stored in the USA

POP TANK – MULTIPLE CHAMBER

POP TANK – MULTIPLE CHAMBER Built in 2009 and never put into service Three ? Bbl. Chambers 65″ OD x 117″ S/S Atmospheric Head Material: SA-36/260W Shell Material: SA-36/260W Head Thickness: 0.250″ Shell Thickness: 0.250″ Never used & stored in Alberta

POP TANK – MULTIPLE CHAMBER

POP TANK – MULTIPLE CHAMBER Built in 2009 and never put into service Three 8 Bbl. Chambers 48″ OD x 144″ S/S Atmospheric Head Material: SA-36/260W Shell Material: SA-36/260W Head Thickness: 0.250″ Shell Thickness: 0.250″ Never used & stored in Alberta

119 BBL. STAINLESS STEEL TANK-DW

119 BBL. STAINLESS STEEL TANK DW Tight Wrap Double Wall Flat Top Built in 2008 and never put into service OD: 12″ Height: 10′ Design SG: 1.015 DMT: -45° F Shell Material: A-240-304L Primary A-516-70N Secondary BTM: Flat Weight: 14,500 Lbs. Never used & Stored in Alberta

PRESSURE SWING ADSORBERS (6)

PRESSURE SWING ADSORBERS (6) Built in 2011 and never used 138″ ID x 23′-5″ S/S 43′-9″ OAL 500 PSI @ 250° F Corrosion Allowance: .063″ MDMT: -45° F @ 500 PSI RT-1 CRN #: V2062.2 “U” Stamp: Yes National Board #: Yes Head Material: SA-516-70N Shell Material: SA-516-70N Inlet: 20″ 300# RFWN Outlet: 10″ 300# […]

60″ ID SPARGER TOWER

60″ ID SPARGER TOWER  Built by Cessco in 1994 and never put into service Size: 60″ ID x 22′-7″ S/S Design Pressure: 465 PSI Design Temperature: 150° / -20° F Shell Material: SA-240-304L Stainless Steel Head Material: SA-240-304L Stainless Steel Radiography: Full P.W.H.T.: No C.A.: 0.0625” N1-Liquid Inlet: 4″ 300# RFWN N2-Outlet: 12″ 300# RFWN N3-Gas Inlet: […]

60″ ID STAINLESS STEEL TOWER

60″ ID STAINLESS STEEL TOWER Built by Cessco in 1994 and never put into service Size: 60″ ID x 22′-7″ S/S Design Pressure: 465 PSI Design Temperature: 150° / -20° F Shell Material: SA-240-304L Stainless Steel Head Material: SA-240-304L Stainless Steel Internals: Sparger Radiography: Full P.W.H.T.: No C.A.: 0.0625″ N1-Liquid Inlet: 4″ 300# RFWN N2-Outlet: […]

6″ 600# RF (6)

BALL VALVES – (6) Built by KIFC or KTM Size: 6″ Class: 600# Stainless Steel Ball Body: A216 WCB Ends: Flanged RF MTR’s Never used & stored in Alberta

6″ 600# RF (6)

BALL VALVES – (6) Built by KIFC or KTM Size: 6″ Class: 600# Stainless Steel Ball Body: A216 WCB Ends: Flanged RF MTR’s Never used & stored in Alberta

12″ 600# DELLA FOGLIA BALL VALVE & BETTIS ACTUATOR

12″ 600# DELLA FOGLIA BALL VALVE & BETTIS ACTUATOR Model: TN Size: 12″ Class: 600# Trim: NACE Temp: -50° F Ends: Flanged RF Body: A-350 LF2 with ENP Internal Coating Ball: A-350 LF2 + ENP Stem: AISI 4140 + ENP ​Fire Safe: Certified API 6FA & API 607 Actuator: Bettis Never used & stored in Alberta