165 METRIC TONS/DAY CO2 (LO-CAT) REMOVAL PLANT

Used

(Ref#: 25-03-1191)

165 METRIC TON PER DAY CO2 PLANT
PROCESS SKID “A”
C-101: 1st Stage CO2 Compressor, Frick Model TDSH 233XL c/w 400 HP 3/60/ 4160 VAC Electric Motor, WP11 Enclosure
CV-101: 1st Stage CO2 Oil Separator
CP-101: 1st Stage CO2 Oil Pump c/w Motor
CF-101A/B: 1st Stage CO2 Oil Filters
CE-101: 1st Stage CO2 Oil Cooler, Flatplate
E-101: 1st Stage CO2 Glycol Cooler, Air X-Changer Model 42VV c/w Motor
PROCESS SKID “B”
V-101: COS Shift Separator, 16″ OD x 28″ S/S, 174 PSIG @ -20 / 284° F, SA-240-304L Stainless Steel
E-102: COS Shift Gas/Gas Exchanger, Stainless Steel Shell & Tube, 146,435 BTU/H
H-101: COS Shift Heater, Caloritech
V-102: COS Shift Vessel, 60″ OD x 14′-0″ S/S, 174 PSIG @ -20 / 284° F, SA-240-304L Stainless Steel
E-103: COS Shift Chiller, 143,942 BTU/H
V-105: CO2 Interstage Separator, 30″ OD x 8′-6″ S/S, 174 PSIG @ -20 / 250° F, SA-240-304L Stainless Steel
C-102: 2nd Stage CO2 Compressor, Frick Model XJF 151L c/w 400 HP 3/60/ 4160 VAC Electric Motor, WP11 Enclosure
CV-102: 2nd Stage CO2 Oil Separator
CF-102A/B: 2nd Stage CO2 Oil Filters, Parker
CE-102: 2nd Stage CO2 Oil Cooler, Flatplate
CP-102: 2nd Stage CO2 Pre-Lube Oil Pump c/w Motor
V-106: CO2 Final Oil Separator, Zander TF20-650X-HTNXCR
V-107: Puraspec (COS Separator), 48″ OD x 12′-0″ S/S, 348 PSIG @ -20 / 250° F
E-104: CO2 Compressor Aftercooler, 378,040 BTU/H
E-105: CO2 Chiller, 403,503 BTU/H
V-108: CO2 Chiller Separator, 24″ OD x 8′-6″ S/S, 348 PSIG @ -20 / 149° F, SA-240-304L Stainless Steel
V-109A/B: CO2 Driers, 30″ OD x 7′-0″ S/S 348 PSIG @ -20 / 644° F
F-102: Regeneration Gas Dust Filter, Peco Model # FG 336-HTO
H-102: CO2 Drier Heater, Caloritech, 204,900 BTU/H
F-101: CO2 Dust Filter
T-181: Cooling Water Surge Tank
PROCESS SKID “C”
E-106: CO2 Condenser, 2,315,370 BTU/H
V-110: CO2 Condenser Separator, 18″ OD x 8′-0″ S/S, 348 PSIG @ -20 / 150° F
C-103: Propane Compressor, Frick Model TDSH 283S c/w 1040 HP 3/60/ 4160 VAC Electric Motor, WP11 Enclosure
CV-103: Propane Oil Separator, 35″ OD x 8′-6″ S/S, 348 PSIG @ -20 / 250° F
CF-103A/B: Propane Oil Filters, Parker
CP-103: Propane Oil pre-lube Pump c/w Motor
CE-103: Propane Oil Cooler, Flatplate
V-111: Propane Economizer, 36″ OD x 7′-0″ S/S, 246 PSIG @ -20 / 150° F
T-109: Propane Oil Drain Tank
E-107: Propane Subcooler, 29,027 BTU/H
P-108: Cooling Water Pump c/w Motor
T-108: Cooling Water Surge Tank
RECEIVER VESSEL
V-112: Propane Receiver, 36″ OD x 40′-0″ S/S, @ -20 / 150° F
F-103A/B: Filter Driers
LO-CAT SULFUR REMOVAL SYSTEM
V-103: Liquid Absorber Vessel, 78″ ID x 6′-0″ S/S, 174 PSIG @ -20 / 250° F, SA-240-304L Stainless Steel
V-104: Flash Pot, 10.75″ ID x 30′-0″ S/S, Atmospheric, SA-240-304L Stainless Steel
T-106: Sulfur Cake Filter Tank, 2 compartments, 36″ x 36″, Stainless Steel
P-106A/B: Filtrate Return Pumps
PM-106A/B: Filtrate Return Pump Motors
P-101: ARI 340 addition pump
PM-101: ARI 340 addition pump motor
T-101: ARI 340 drum
P-102: ARI 400 addition pump
PM-102: ARI 400 addition pump motor
T-102: ARI 400 drum
P-103: ARI 600 addition pump
PM-103: ARI 600 addition pump motor
T-103: ARI 600 drum
P-104: ARI 350 addition pump
PM-104: ARI 350 addition pump motor
T-104: ARI 350 drum
P-105: 45% KOH addition pump
PM-105: 45% KOH addition pump motor
T-105: 45% KOH drum
COOLERS/CONDENSERS
E-108: Water Cooler, Smithco, 54 PSIG @ -40 / 180° F, 467,855 BTU/H
EM-108A/B: Water Cooler Fan Motors, 20 HP 3/60/480 VAC, TEFC Enclosure
E-109: Propane Condenser, Smithco, 348 PSIG @ -40 / 250° F, 3,215,837 BTU/H
EM-109A/B: Propane Condenser Fan Motors, 20 HP 3/60/480 VAC, TEFC Enclosure
E-110: Propane Trim Condenser, Smithco, 348 PSIG @ -40 / 250° F, 1,533,281 BTU/H
EM-110A/B: Propane Trim Condenser Fan Motors, 10 HP 3/60/480 VAC, TEFC Enclosure
Status: Connected in Alberta

Gallery

25-1191-1
25-1191-2
25-1191-3
25-1191-4
25-1191-5
25-1191-6
25-1191-7
25-1191-7a
25-1191-9
25-1191-aa
25-1191-d
25-1191-f
25-1191-g
25-1191-h
25-1191-i
Go Back to View All Listings

For more information contact:
Colin Gunning Tel: (587) 231-0122